Category Archives: Places

Some German Movies I Liked

I remember a discussion I had as a kid, about German culture. A normal kind of conversation, in my family. As Francophones of Québécois and Swiss origins, our perspectives on Germany were quite skewed. And that’s probably why it was fun to discuss these things, casually. I was probably ten years-old so this happened almost thirty years ago.

As far as I can remember, much of our discussion had to do with stereotypes. But I remember saying something as if it were common-knowledge yet clearly wasn’t: that Germans were “known” for great movies.

At the time, I probably hadn’t seen many German movies. Even today, I can’t really say that I’ve watched a lot of German movies. At the time, I was probably reacting from having watched or even heard of a single German movie. Come to think of it, it may even have been based on an Austrian movie I had seen something about. In other words, my statement wasn’t based on a true appreciation but on a vague impression which surprised those with whom I shared it.

Since that time, I seem to have developed an appreciation for German movies. Again, not that I’ve seen so many of them. But those I’ve watched I usually enjoyed.

Several of them came back through my mind as I was playing TRAUMA. Not that the game directly referred to any of these movies. But the game’s visuals did trigger my reminiscence.

So, a very short list of some German movies I’ve enjoyed.

  1. Lola rennt (Run Lola Run)
  2. Im Juli (In July)
  3. Der Himmel über Berlin (Wings of Desire)
  4. Erleuchtung garantiert (Enlightenment Guaranteed)
  5. Bella Martha (Mostly Martha)

Yup, just five films. Of course, I could list many more French or Québécois movies I’ve liked. Thing is, I can hardly remember another German movie. In other words, it feels as though I have never watched a German movie that I didn’t enjoy. And there are some movies I haven”t seen but that I’d probably enjoy, such as Good Bye Lenin!

Not that there’s anything specific about German movies. As a kid, I probably believed in a sort of “national character” but my training in anthropology got it out of me before I watched most of these movies. But it doesn’t mean that there’s nothing common between those movies. Or that I’m not constructing my own “reading” of German movies on these few examples.

For one thing, it’s quite likely that German movies which are released outside of Germany have some specific features. Chances are, there are plenty of movies in Germany which never get released outside and these may differ quite a lot from what I recognize a German movie to be. After all, I’m not including in my short list the variety of movies in which Germans were involved through coproduction. And all of these movies are about some place in Germany, the same way stereotypical Irish songs (those created in North America) have to do with places in Ireland.

So I end up with a skewed, fragmentary, and artificial view of German movies from just a few examples. What’s funny about it is that, based on my experience with TRAUMA (as well as with a few German TV shows), my bias continues to affect my perception of other German productions.

Had I not been trained in anthropology, I might not perceive the severe limits of my views on German culture. In fact, because German Romanticism has been so important in the history of my discipline, my limited experience of filmic Germany clashes with different encounters with the complexities behind German identity and cultural awareness.

Maybe it just means that I should go spend a little while in Germany. I hear they have good beer. 😉

Espace social et innovation ouverte

Présentation pour le panel « Innovation ouverte et living labs, la divergence cohésive par les réseaux sociaux ?» organisé par Patrick Dubé dans le cadre de la dixième conférence internationale webcom Montréal.

Landing On His Feet: Nicolas Chourot

Listening to Nicolas Chourot‘s début album: First Landing (available on iTunes). Now, here’s someone who found his voice.

A few years ago, Nicolas Chourot played with us as part of Madou Diarra & Dakan, a group playing music created for Mali’s hunters’ associations.

Before Chourot joined us, I had been a member of Dakan for several years and my perspective on the group’s music was rather specific. As an ethnomusicologist working on the original context for hunters’ music, I frequently tried to maintain the connection with what makes Malian hunters so interesting, including a certain sense of continuity through widespread changes.

When Nicolas came up with his rather impressive equipment, I began to wonder how it would all fit. A very open-minded, respectful, and personable musician, Nicolas was able to both transform Dakan’s music from within and adapt his playing to a rather distant performance style. Not an easy task for any musician and Nicolas sure was to be commended for such a success.

After a while, Chourot and Dakan’s Madou Diarra parted ways. Still, Nicolas remained a member of the same informal music network as several people who had been in Dakan, including several of my good friends. And though I haven’t seen Nicolas in quite a while, he remains in my mind as someone whose playing and attitude toward music I enjoy.

Unfortunately, I was unable to attend the launch of Nicolas’s launch/show, on August 29. What’s strange is that it took me until today to finally buy Nicolas’s album. Not exactly sure why. Guess my mind was elsewhere. For months.

Ah, well… Désolé Nicolas!

But I did finally get the album. And I’m really glad I did!

When I first heard Nicolas’s playing, I couldn’t help but think about Michel Cusson. I guess it was partly because both have been fusing Jazz and “World” versions of the electric guitar. But there was something else in Nicolas’s playing that I readily associated with Cusson. Never analyzed it. Nor am I planning to analyze it at any point. Despite my music school background and ethnomusicological training, I’ve rarely been one for formal analysis. But there’s something intriguing, there, as a connection. It’s not “imitation as sincerest form of flattery”: Chourot wasn’t copying Cusson. But it seemed like both were “drinking from the same spring,” so to speak.

In First Landing, this interpretation comes back to my mind.

See, not only does Chourot’s playing still have some Cussonisms, but I hear other voices connected to Cusson’s. Including that of Cusson’s former bandmate Alain Caron And even Uzeb itself, the almost mythical band which brought Caron and Cusson together.

For a while, in the 1980s, Uzeb dominated a large part of Quebec’s local Jazz market. At the time, other Jazz players were struggling to get some recognition. As they do now. To an extent, Uzeb was a unique phenomenon in Quebec’s musical history since, despite their diversity and the quality of their work, Quebec’s Jazz musicians haven’t become mainstream again. Which might be a good thing but bears some reflection. What was so special about Uzeb? Why did it disappear? Can’t other Jazz acts fill the space left by Uzeb, after all these years?

I don’t think it’s what Nicolas is trying to do. But if he were, First Landing would be the way to go at it. It doesn’t “have all the ingredients.” That wouldn’t work. But, at the risk of sounding like an old cub scout, it has “the Uzeb spirit.”

Which brings me to other things I hear. Other bands with distinct, if indirect, Uzebian connections.

One is Jazzorange, which was a significant part of Lausanne’s Jazz scene when I was living there.My good friend Vincent Jaton introduced to Jazzorange in 1994 and Uzeb’s alumni Caron and Cusson were definitely on my mind at the time.

Vincent, musician and producer extraordinaire, introduced me to a number of musicians and I owe him a huge debt for helping me along a path to musical (self-)discovery. Vincent’s own playing also shares a few things with what I hear in First Landing, but the connection with Jazzorange is more obvious, to me.

Another band I hear in connection to Chourot’s playing is Sixun. That French band, now 25 years old, is probably among the longest-lasting acts in this category of Jazz. Some Jazz ensembles are older (including one of my favourites, Oregon). But Sixun is a key example of what some people call “Jazz Fusion.”

Which is a term I avoided, as I mentioned diverse musicians. Not because I personally dislike the term. It’s as imprecise as any other term describing a “musical genre” (and as misleading as some of my pet peeves). But I’m not against its use, especially since there is a significant degree of agreement about several of the musicians I mention being classified (at least originally) as “Fusion.” Problem is, the term has also been associated with an attitude toward music which isn’t that conducive to thoughtful discussion. In some ways, “Fusion” is used for dismissal more than as a way to discuss musical similarities.

Still, there are musical features that I appreciate in a number of Jazz Fusion performances, some of which are found in some combination through the playing of several of the musicians I’m mentioning here.

Some things like the interactions between the bass and other instruments, some lyrical basslines, the fact that melodic lines may be doubled by the bass… Basically, much of it has to do with the bass. And, in Jazz, the bass is often key. As Darcey Leigh said to Dale Turner (Lonette McKee and Dexter Gordon’s characters in ‘Round Midnight):

You’re the one who taught me to listen to the bass instead of the drums

Actually, there might be a key point about the way yours truly listens to bass players. Even though I’m something of a “frustrated bassist” (but happy saxophonist), I probably have a limited understanding of bass playing. To me, there’s a large variety of styles of bass playing, of course, but several players seem to sound a bit like one another. It’s not really a full classification that I have in my mind but I can’t help but hear similarities between bass performers. Like clusters.

Sometimes, these links may go outside of the music domain, strictly speaking.  For instance, three of my favourite bassists are from Cameroon: Guy Langue, Richard Bona, and Étienne Mbappe. Not that I heard these musicians together: I noticed Mbappe as a member of ONJ in 1989, I first heard Bona as part of the Zawinul syndicate in 1997, and I’ve been playing with Langue for a number of years (mostly with Madou Diarra & Dakan). Further, as I’m discovering British/Nigerian bass player Michael Olatuja, I get to extend what I hear as the Cameroonian connection to parts of West African music that I know a bit more about. Of course, I might be imagining things. But my imagination goes in certain directions.

Something similar happens to me with “Fusion” players. Alain Caron is known for his fretless bass sound and virtuosic playing, but it’s not really about that, I don’t think. It’s something about the way the bass is embedded in the rest of the band, with something of a Jazz/Rock element but also more connected to lyricism, complex melodic lines, and relatively “clean” playing. The last one may relate, somehow, to the Fusion stereotype of coldness and machine-like precision. But my broad impression of what I might call “Fusion bass” actually involves quite a bit of warmth. And humanness.

Going back to Chourot and other “Jazz Fusion” acts I’ve been thinking about, it’s quite possible that Gilles Deslauriers (who plays bass on Chourot’s First Landing) is the one who reminds me of other Fusion acts. No idea if Bob Laredo (Jazzorange), Michel Alibo (Sixun), Alain Caron (Uzeb), and Gilles Deslauriers really all have something in common. But my own subjective assessment of bass playing connects them in a special way.

The most important point, to me, is that even if this connection is idiosyncratic, it still helps me enjoy First Landing.

Nicolas Chourot and his friends from that album (including Gilles Deslauriers) are playing at O Patro Výš, next Saturday (January 23, 2010).

Homeroasting and Coffee Geekness

I’m a coffee geek. By which I mean that I have a geeky attitude to coffee. I’m passionate about the crafts and arts of coffee making, I seek coffee-related knowledge wherever I can find it, I can talk about coffee until people’s eyes glaze over (which happens more quickly than I’d guess possible), and I even dream about coffee gadgets. I’m not a typical gadget freak, as far as geek culture goes, but coffee is one area where I may invest in some gadgetry.

Perhaps my most visible acts of coffee geekery came in the form of updates I posted through diverse platforms about my home coffee brewing experiences. Did it from February to July. These posts contained cryptic details about diverse measurements, including water temperature and index of refraction. It probably contributed to people’s awareness of my coffee geek identity, which itself has been the source of fun things like a friend bringing me back coffee from Ethiopia.

But I digress, a bit. This is both about coffee geekness in general and about homeroasting in particular.

See, I bought myself this Hearthware i-Roast 2 dedicated homeroasting device. And I’m dreaming about coffee again.

Been homeroasting since December 2002, at the time I moved to Moncton, New Brunswick and was lucky enough to get in touch with Terry Montague of Down Esst Coffee.

Though I had been wishing to homeroast for a while before that and had become an intense coffee-lover fifteen years prior to contacting him, Terry is the one who enabled me to start roasting green coffee beans at home. He procured me a popcorn popper, sourced me some quality green beans, gave me some advice. And off I was.

Homeroasting is remarkably easy. And it makes a huge difference in one’s appreciation of coffee. People in the coffee industry, especially baristas and professional roasters, tend to talk about the “channel” going from the farmer to the “consumer.” In some ways, homeroasting gets the coffee-lover a few steps closer to the farmer, both by eliminating a few intermediaries in the channel and by making coffee into much less of a commodity. Once you’ve spent some time smelling the fumes emanated by different coffee varietals and looking carefully at individual beans, you can’t help but get a deeper appreciation for the farmer’s and even the picker’s work. When you roast 150g or less at a time, every coffee bean seems much more valuable. Further, as you experiment with different beans and roast profiles, you get to experience coffee in all of its splendour.

A popcorn popper may sound like a crude way to roast coffee. And it might be. Naysayers may be right in their appraisal of poppers as a coffee roasting method. You’re restricted in different ways and it seems impossible to produce exquisite coffee. But having roasted with a popper for seven years, I can say that my poppers gave me some of my most memorable coffee experiences. Including some of the most pleasant ones, like this organic Sumatra from Theta Ridge Coffee that I roasted in my campus appartment at IUSB and brewed using my beloved Brikka.

Over the years, I’ve roasted a large variety of coffee beans. I typically buy a pound each of three or four varietals and experiment with them for a while.

Mostly because I’ve been moving around quite a bit, I’ve been buying green coffee beans from a rather large variety of places. I try to buy them locally, as much as possible (those beans have travelled far enough and I’ve had enough problems with courier companies). But I did participate in a few mail orders or got beans shipped to me for some reason or another. Sourcing green coffee beans has almost been part of my routine in those different places where I’ve been living since 2002: Moncton, Montreal, Fredericton, South Bend, Northampton, Brockton, Cambridge, and Austin. Off the top of my head, I’ve sourced beans from:

  1. Down East
  2. Toi, moi & café
  3. Brûlerie Saint-Denis
  4. Brûlerie des quatre vents
  5. Terra
  6. Theta Ridge
  7. Dean’s Beans
  8. Green Beanery
  9. Cuvée
  10. Fair Bean
  11. Sweet Maria’s
  12. Evergreen Coffee
  13. Mon café vert
  14. Café-Vrac
  15. Roastmasters
  16. Santropol

And probably a few other places, including this one place in Ethiopia where my friend Erin bought some.

So, over the years, I got beans from a rather large array of places and from a wide range of regional varietals.

I rapidly started blending freshly-roasted beans. Typically, I would start a blend by roasting three batches in a row. I would taste some as “single origin” (coffee made from a single bean varietal, usually from the same farm or estate), shortly after roasting. But, typically, I would mix my batches of freshly roasted coffee to produce a main blend. I would then add fresh batches after a few days to fine-tune the blend to satisfy my needs and enhance my “palate” (my ability to pick up different flavours and aromas).

Once the quantity of green beans in a particular bag would fall below an amount I can reasonably roast as a full batch (minimum around 100g), I would put those green beans in a pre-roast blend, typically in a specially-marked ziplock bag. Roasting this blend would usually be a way for me to add some complexity to my roasted blends.

And complexity I got. Lots of diverse flavours and aromas. Different things to “write home about.”

But I was obviously limited in what I could do with my poppers. The only real controls that I had in homeroasting, apart from blending, consisted in the bean quantity and roasting time. Ambient temperature was clearly a factor, but not one over which I was able to exercise much control. Especially since I frequently ended up roasting outside, so as to not incommodate people with fumes, noise, and chaff. The few homeroast batches which didn’t work probably failed because of low ambient temperature.

One reason I stuck with poppers for so long was that I had heard that dedicated roasters weren’t that durable. I’ve probably used three or four different hot air popcorn poppers, over the years. Eventually, they just stop working, when you use them for coffee beans. As I’d buy them at garage sales and Salvation Army stores for 3-4$, replacing them didn’t feel like such a financially difficult thing to do, though finding them could occasionally be a challenge. Money was also an issue. Though homeroasting was important for me, I wasn’t ready to pay around 200$ for an entry-level dedicated roaster. I was thinking about saving money for a Behmor 1600, which offers several advantages over other roasters. But I finally gave in and bought my i-Roast as a kind of holiday gift to myself.

One broad reason is that my financial situation has improved since I started a kind of partial professional reorientation (PPR). I have a blogpost in mind about this PPR, and I’ll probably write it soon. But this post isn’t about my PPR.

Although, the series of events which led to my purchase does relate to my PPR, somehow.

See, the beans I (indirectly) got from Roastmasters came from a friend who bought a Behmor to roast cocoa beans. The green coffee beans came with the roaster but my friend didn’t want to roast coffee in his brand new Behmor, to avoid the risk of coffee oils and flavours getting into his chocolate. My friend asked me to roast some of these beans for his housemates (he’s not that intensely into coffee, himself). When I went to drop some homeroasted coffee by the Station C co-working space where he spends some of his time, my friend was discussing a project with Duncan Moore, whom I had met a few times but with whom I had had few interactions. The three of us had what we considered a very fruitful yet very short conversation. Later on, I got to do a small but fun project with Duncan. And I decided to invest that money into coffee.

A homeroaster seemed like the most appropriate investment. The Behmor was still out of reach but the i-Roast seemed like a reasonable purchase. Especially if I could buy it used.

But I was also thinking about buying it new, as long as I could get it quickly. It took me several years to make a decision about this purchase but, once I made it, I wanted something as close to “instant gratification” as possible. In some ways, the i-Roast was my equivalent to Little Mrs Sommers‘s “pair of silk stockings.”

At the time, Mon café vert seemed like the only place where I could buy a new i-Roast. I tried several times to reach them to no avail. As I was in the Mile-End as I decided to make that purchase, I went to Caffè in Gamba, both to use the WiFi signal and to check if, by any chance, they might not have started selling roasters. They didn’t, of course, homeroasters isn’t mainstream enough. But, as I was there, I saw the Hario Ceramic Coffee Mill Skerton, a “hand-cranked” coffee grinder about which I had read some rather positive reviews.

For the past few years, I had been using a Bodum Antigua conical burr electric coffee grinder. This grinder was doing the job, but maybe because of “wear and tear,” it started taking a lot longer to grind a small amount of coffee. The grind took so long, at some points, that the grounds were warm to the touch and it seemed like the grinder’s motor was itself heating.

So I started dreaming about the Baratza Vario, a kind of prosumer electric grinder which seemed like the ideal machine for someone who uses diverse coffee making methods. The Vario is rather expensive and seemed like overkill, for my current coffee setup. But I was lusting over it and, yes, dreaming about it.

One day, maybe, I’ll be able to afford a Vario.

In the meantime, and more reasonably, I had been thinking about “Turkish-style mills.” A friend lent me a box-type manual mill at some point and I did find it produced a nice grind, but it wasn’t that convenient for me, partly because the coffee drops into a small drawer which rapidly gets full. A handmill seemed somehow more convenient and there are some generic models which are sold in different parts of the World, especially in the Arab World. So I got the impression that I might be able to find handmills locally and started looking for them all over the place, enquiring at diverse stores and asking friends who have used those mills in the past. Of course, they can be purchased online. But they end up being relatively expensive and my manual experience wasn’t so positive as to convince me to spend so much money on one.

The Skerton was another story. It was much more convenient than a box-type manual mill. And, at Gamba, it was inexpensive enough for me to purchase it on the spot. I don’t tend to do this very often so I did feel strange about such an impulse purchase. But I certainly don’t regret it.

Especially since it complements my other purchases.

So, going to the i-Roast.

Over the years, I had been looking for the i-Roast and Behmor at most of the obvious sites where one might buy used devices like these. eBay, Craig’s List, Kijiji… As a matter of fact, I had seen an i-Roast on one of these, but I was still hesitating. Not exactly sure why, but it probably had to do with the fact that these homeroasters aren’t necessarily that durable and I couldn’t see how old this particular i-Roast was.

I eventually called to find out, after taking my decision to get an i-Roast. Turns out that it’s still under warranty, is in great condition, and was being sold by a very interesting (and clearly trustworthy) alto singer who happens to sing with a friend of mine who is also a local beer homebrewer. The same day I bought the roaster, I went to the cocoa-roasting friend’s place and saw a Behmor for the first time. And I tasted some really nice homemade chocolate. And met other interesting people including a couple that I saw, again, while taking the bus after purchasing the roaster.

The series of coincidences in that whole situation impressed me in a sense of awe. Not out of some strange superstition or other folk belief. But different things are all neatly packaged in a way that most of my life isn’t. Nothing weird about this. The packaging is easy to explain and mostly comes from my own perception. The effect is still there that it all fits.

And the i-Roast 2 itself fits, too.

It’s clearly not the ultimate coffee geek’s ideal roaster. But I get the impression it could become so. In fact, one reason I hesitated to buy the i-Roast 2 is that I was wondering if Hearthware might be coming out with the i-Roast 3, in the not-so-distant future.

I’m guessing that Hearthware might be getting ready to release a new roaster. I’m using unreliable information, but it’s still an educated guess. So, apparently…

I could just imagine what the i-Roast 3 might be. As I’m likely to get, I have a number of crazy ideas.

One “killer feature” actually relates both to the differences between the i-Roast and i-Roast 2 as well as to the geek factor behind homeroasting: roast profiles as computer files. Yes, I know, it sounds crazy. And, somehow, it’s quite unlikely that Hearthware would add such a feature on an entry-level machine. But I seriously think it’d make the roaster much closer to a roasting geek’s ultimate machine.

For one thing, programming a roast profile on the i-Roast is notoriously awkward. Sure, you get used to it. But it’s clearly suboptimal. And one major improvement of the i-Roast 2 over the original i-Roast is that the original version didn’t maintain profiles if you unplugged it. The next step, in my mind, would be to have some way to transfer a profile from a computer to the roaster, say via a slot for SD cards or even a USB port.

What this would open isn’t only the convenience of saving profiles, but actually a way to share them with fellow homeroasters. Since a lot in geek culture has to do with sharing information, a neat effect could come out of shareable roast profiles. In fact, when I looked for example roast profiles, I found forum threads, guides, and incredibly elaborate experiments. Eventually, it might be possible to exchange roasting profiles relating to coffee beans from the same shipment and compare roasting. Given the well-known effects of getting a group of people using online tools to share information, this could greatly improve the state of homeroasting and even make it break out of the very small niche in which it currently sits.

Of course, there are many problems with that approach, including things as trivial as voltage differences as well as bigger issues such as noise levels:

But I’m still dreaming about such things.

In fact, I go a few steps further. A roaster which could somehow connect to a computer might also be used to track data about temperature and voltage. In my own experiments with the i-Roast 2, I’ve been logging temperatures at 15 second intervals along with information about roast profile, quantity of beans, etc. It may sound extreme but it already helped me achieve a result I wanted to achieve. And it’d be precisely the kind of information I would like to share with other homeroasters, eventually building a community of practice.

Nothing but geekness, of course. Shall the geek inherit the Earth?

Happiness Anniversary

HappyTweet

A year ago today, I found out that I was, in fact, happy.

Continue reading Happiness Anniversary

How I Got Into Beer

Was doing some homebrewing experimentation (sour mash, watermelon, honey, complex yeast cultures…) and I got to think about what I’d say in an interview about my brewing activities.

It’s a bit more personal than my usual posts in English (my more personal blogposts are usually in French), but it seems fitting.

I also have something of a backlog of blogposts I really should do ASAP. But blogging is also about seizing the moment. I feel like writing about beer. 😛

So…

As you might know, the drinking age in Quebec is 18, as in most parts of the World except for the US. What is somewhat distinct about Qc with regards to drinking age is that responsible drinking is the key and we tend to have a more “European” attitude toward alcohol: as compared to the Rest of Canada, there’s a fair bit of leeway in terms of when someone is allowed to drink alcohol. We also tend to learn to drink in the family environment, and not necessarily with friends. What it means, I would argue, is that we do our mistakes in a relatively safe context. By the time drinking with peers becomes important (e.g., in university or with colleagues), many of us know that there’s no fun in abusing alcohol and that there are better ways to prove ourselves than binge drinking. According to Barrett Seaman, author of Binge: What Your College Student Won’t Tell You, even students from the US studying at McGill University in Montreal are more likely to drink responsibly than most students he’s seen in the US. (In Montreal, McGill tends to be recognized as a place where binge drinking is most likely to occur, partly because of the presence of US students. In addition, binge drinking is becoming more conspicuous, in Qc, perhaps because of media pressure or because of influence from the US.)

All this to say that it’s rather common for a Québécois teen to at least try alcohol at a relatively age. Because of my family’s connections with Switzerland and France, we probably pushed this even further than most Québécois family. In other words, I had my first sips of alcohol at a relatively early age (I won’t tell) and, by age 16, I could distinguish different varieties of Swiss wines, during an extended trip to Switzerland. Several of these wines were produced by relatives and friends, from their own vineyards. They didn’t contain sulfites and were often quite distinctive. To this day, I miss those wines. In fact, I’d say that Swiss wines are among the best kept secrets of the wine world. Thing is, it seems that Swiss vineyards barely produce enough for local consumption so they don’t try to export any of it.

Anyhoo…

By age 18, my attitude toward alcohol was already quite similar to what it is now: it’s something that shouldn’t be abused but that can be very tasty. I had a similar attitude toward coffee, that I started to drink regularly when I was 15. (Apart from being a homebrewer and a beer geek, I’m also a homeroaster and coffee geek. Someone once called me a “Renaissance drinker.”)

When I started working in French restaurants, it was relatively normal for staff members to drink alcohol at the end of the shift. In fact, at one place where I worked, the staff meal at the end of the evening shift was a lengthy dinner accompanied by some quality wine. My palate was still relatively untrained, but I remember that we would, in fact, discuss the wine on at least some occasions. And I remember one customer, a stage director, who would share his bottle of wine with the staff during his meal: his doctor told him to reduce his alcohol consumption and the wine only came in 750ml bottles. 😉

That same restaurant might have been the first place where I tried a North American craft beer. At least, this is where I started to know about craft beer in North America. It was probably McAuslan‘s St. Ambroise Stout. But I also had opportunities to have some St. Ambroise Pale Ale. I just preferred the Stout.

At one point, that restaurant got promotional beer from a microbrewery called Massawippi. That beer was so unpopular that we weren’t able to give it away to customers. Can’t recall how it tasted but nobody enjoyed it. The reason this brewery is significant is that their license was the one which was bought to create a little microbrewery called Unibroue. So, it seems that my memories go back to some relatively early phases in Quebec’s craft beer history. I also have rather positive memories of when Brasal opened.

Somewhere along the way, I had started to pick up on some European beers. Apart from macros (Guinness, Heineken, etc.), I’m not really sure what I had tried by that point. But even though these were relatively uninspiring beers, they somehow got me to understand that there was more to beer than Molson, Labatt, Laurentide, O’Keefe, and Black Label.

The time I spent living in Switzerland, in 1994-1995, is probably the turning point for me in terms of beer tasting. Not only did I get to drink the occasional EuroLager and generic stout, but I was getting into Belgian Ales and Lambics. My “session beer,” for a while, was a wit sold in CH as Wittekop. Maybe not the most unique wit out there. But it was the house beer at Bleu Lézard, and I drank enough of it then to miss it. I also got to try several of the Trappists. In fact, one of the pubs on the EPFL campus had a pretty good beer selection, including Rochefort, Chimay, Westmalle, and Orval. The first lambic I remember was Mort Subite Gueuze, on tap at a very quirky place that remains on my mind as this near-cinematic experience.

At the end of my time in Switzerland, I took a trip to Prague and Vienna. Already at that time, I was interested enough in beer that a significant proportion of my efforts were about tasting different beers while I was there. I still remember a very tasty “Dopplemalz” beer from Vienna and, though I already preferred ales, several nice lagers from Prague.

A year after coming back to North America, I traveled to Scotland and England with a bunch of friends. Beer was an important part of the trip. Though I had no notion of what CAMRA was, I remember having some real ales in diverse places. Even some of the macro beers were different enough to merit our interest. For instance, we tried Fraoch then, probably before it became available in North America. We also visited a few distilleries which, though I didn’t know it at the time, were my first introduction to some beer brewing concepts.

Which brings me to homebrewing.

The first time I had homebrew was probably at my saxophone teacher’s place. He did a party for all of us and had brewed two batches. One was either a stout or a porter and the other one was probably some kind of blonde ale. What I remember of those beers is very vague (that was probably 19 years ago), but I know I enjoyed the stout and was impressed by the low price-quality ratio. From that point on, I knew I wanted to brew. Not really to cut costs (I wasn’t drinking much, anyway). But to try different beers. Or, at least, to easily get access to those beers which were more interesting than the macrobrewed ones.

I remember another occasion with a homebrewer, a few years later. I only tried a few sips of the beer but I remember that he was talking about the low price. Again, what made an impression on me wasn’t so much the price itself. But the low price for the quality.

At the same time, I had been thinking about all sorts of things which would later become my “hobbies.” I had never had hobbies in my life but I was thinking about homeroasting coffee, as a way to get really fresh coffee and explore diverse flavours. Thing is, I was already this hedonist I keep claiming I am. Tasting diverse things was already an important pleasure in my life.

So, homebrewing was on my mind because of the quality-price ratio and because it could allow me to explore diverse flavours.

When I moved to Bloomington, IN, I got to interact with some homebrewers. More specifically, I went to an amazing party thrown by an ethnomusicologist/homebrewer. The guy’s beer was really quite good. And it came from a full kegging system.

I started dreaming.

Brewpubs, beerpubs, and microbreweries were already part of my life. For instance, without being a true regular, I had been going to Cheval blanc on a number of occasions. And my “go to” beer had been Unibroue, for a while.

At the time, I was moving back and forth between Quebec and Indiana. In Bloomington, I was enjoying beers from Upland’s Brewing Co., which had just opened, and Bloomington Brewing Co., which was distributed around the city. I was also into some other beers, including some macro imports like Newcastle Brown Ale. And, at liquor stores around the city (including Big Red), I was discovering a few American craft beers, though I didn’t know enough to really make my way through those. In fact, I remember asking for Unibroue to be distributed there, which eventually happened. And I’m pretty sure I didn’t try Three Floyds, at the time.

So I was giving craft beer some thought.

Then, in February 1999, I discovered Dieu du ciel. I may have gone there in late 1998, but the significant point was in February 1999. This is when I tried their first batch of “Spring Equinox” Maple Scotch Ale. This is the beer that turned me into a homebrewer. This is the beer that made me changed my perspetive about beer. At that point, I knew that I would eventually have to brew.

Which happened in July 1999, I think. My then-girlfriend had offered me a homebrewing starter kit as a birthday gift. (Or maybe she gave it to me for Christmas… But I think it was summer.) Can’t remember the extent to which I was talking about beer, at that point, but it was probably a fair bit, i.e., I was probably becoming annoying about it. And before getting the kit, I was probably daydreaming about brewing.

Even before getting the kit, I had started doing some reading. The aforementioned ethnomusicologist/homebrewer had sent me a Word file with a set of instructions and some information about equipment. It was actually much more elaborate than the starter kit I eventually got. So I kept wondering about all the issues and started getting some other pieces of equipment. In other words, I was already deep into it.

In fact, when I got my first brewing book, I also started reading feverishly, in a way I hadn’t done in years. Even before brewing the first batch, I was passionate about brewing.

Thanks to the ‘Net, I was rapidly amassing a lot of information about brewing. Including some recipes.

Unsurprisingly, the first beer I brewed was a maple beer, based on my memory of that Dieu du ciel beer. However, for some reason, that first beer was a maple porter, instead of a maple scotch ale. I brewed it with extract and steeped grain. I probably used a fresh pack of Coopers yeast. I don’t think I used fresh hops (the beer wasn’t supposed to be hop-forward). I do know I used maple syrup at the end of boil and maple sugar at priming.

It wasn’t an amazing beer, perhaps. But it was tasty enough. And it got me started. I did a few batches with extract and moved to all-grain almost right away. I remember some comments on my first maple porter, coming from some much more advanced brewers than I was. They couldn’t believe that it was an extract beer. I wasn’t evaluating my extract beer very highly. But I wasn’t ashamed of it either.

Those comments came from brewers who were hanging out on the Biéropholie website. After learning about brewing on my own, I had eventually found the site and had started interacting with some local Québécois homebrewers.

This was my first contact with “craft beer culture.” I had been in touch with fellow craft beer enthusiasts. But hanging out with Bièropholie people and going to social events they had organized was my first foray into something more of a social group with its associated “mode of operation.” It was a fascinating experience. As an ethnographer and social butterfly, this introduction to the social and cultural aspects of homebrewing was decisive. Because I was moving all the time, it was hard for me to stay connected with that group. But I made some ties there and I still bump into a few of the people I met through Bièropholie.

At the time I first started interacting with the Bièropholie gang, I was looking for a brewclub. Many online resources mentioned clubs and associations and they sounded exactly like the kind of thing I needed. Not only for practical reasons (it’s easier to learn techniques in such a context, getting feedback from knowledgeable people is essential, and tasting other people’s beers is an eye-opener), but also for social reasons. Homebrewing was never meant to be a solitary experience, for me.

I was too much of a social butterfly.

Which brings me back to childhood. As a kid, I was often ostracized. And I always tried to build clubs. It never really worked. Things got much better for me after age 15, and I had a rich social life by the time I became a young adult. But, in 2000-2001, I was still looking for a club to which I could belong. Unlike Groucho, I cared a lot about any club which would accept me.

As fun as it was, Bièropholie wasn’t an actual brewclub. Brewers posting on the site mostly met as a group during an annual event, a BBQ which became known as «Xè de mille» (“Nth of 1000”) in 2001. The 2000 edition (“0th of 1000”) was when I had my maple porter tasted by more advanced brewers. Part of event was a bit like what brewclub meetings tend to be: tasting each other’s brews, providing feedback, discussing methods and ingredients, etc. But because people didn’t meet regularly as a group, because people were scattered all around Quebec, and because there wasn’t much in terms of “contribution to primary identity,” it didn’t feel like a brewclub, at least not of the type I was reading about.

The MontreAlers brewclub was formed at about that time. For some reason, it took me a while to learn of its existence. I distinctly remember looking for a Montreal-based club through diverse online resources, including the famed HomeBrew Digest. And I know I tried to contact someone from McGill who apparently had a club going. But I never found the ‘Alers.

I did eventually find the Members of Barleyment. Or, at least, some of the people who belonged to this “virtual brewclub.” It probably wasn’t until I moved to New Brunswick in 2003, but it was another turning point. One MoB member I met was Daniel Chisholm, a homebrewer near Fredericton, NB, who gave me insight on the New Brunswick beer scene (I was teaching in Fredericton at the time). Perhaps more importantly, Daniel also invited me to the Big Strange New Brunswick Brew (BSNBB), a brewing event like the ones I kept dreaming about. This was partly a Big Brew, an occasion for brewers to brew together at the same place. But it was also a very fun social event.

It’s through the BSNBB that I met MontreAlers Andrew Ludwig and John Misrahi. John is the instigator of the MontreAlers brewclub. Coming back to Montreal a few weeks after BSNBB, I was looking forward to attend my first meeting of the ‘Alers brewclub, in July 2003.

Which was another fascinating experience. Through it, I was able to observe different attitudes toward brewing. Misrahi, for instance, is a fellow experimental homebrewer to the point that I took to call him “MadMan Misrahi.” But a majority of ‘Alers are more directly on the “engineering” side of brewing. I also got to observe some interesting social dynamics among brewers, something which remained important as I moved to different places and got to observe other brewclubs and brewers meetings, such as the Chicago Beer Society’s Thirst Fursdays. Eventually, this all formed the backdrop for a set of informal observations which were the corse of a presentation I gave about craft beer and cultural identity.

Through all of these brewing-related groups, I’ve been positioning myself as an experimenter.  My goal isn’t necessarily to consistently make quality beer, to emulate some beers I know, or to win prizes in style-based brewing competitions. My thing is to have fun and try new things. Consistent beer is available anywhere and I drink little enough that I can afford enough of it. But homebrewing is almost a way for me to connect with my childhood.

There can be a “mad scientist” effect to homebrewing. Michael Tonsmeire calls himself The Mad Fermentationist and James Spencer at Basic Brewing has been interviewing a number of homebrewer who do rather unusual experiments.

I count myself among the ranks of the “Mad Brewers.” Oh, we’re not doing anything completely crazy. But slightly mad we are.

Through the selective memory of an adult with regards to his childhood, I might say that I was “always like that.” As a kid, I wanted to be everything at once: mayor, astronaut, fireman, and scholar. The researcher’s spirit had me “always try new things.” I even had a slight illusion of grandeur in that I would picture myself accomplishing all sorts of strange things. Had I known about it as a kid, I would have believed that I could solve the Poincaré conjecture. Mathematicians were strange enough for me.

But there’s something more closely related to homebrewing which comes back to my mind as I do experiments with beer. I had this tendency to do all sorts of concoctions. Not only the magic potions kids do with mud  and dishwashing liquid. But all sorts of potable drinks that a mixologist may experiment with. There wasn’t any alcohol in those drinks, but the principle was the same. Some of them were good enough for my tastes. But I never achieved the kind of breakthrough drink which would please masses. I did, however, got my experimentation spirit to bear on food.

By age nine, I was cooking for myself at lunch. Nothing very elaborate, maybe. It often consisted of reheating leftovers. But I got used to the stove (we didn’t have a microwave oven, at the time). And I sometimes cooked some eggs or similar things. To this day, eggs are still my default food.

And, like many children, I occasionally contributing to cooking. Simple things like mixing ingredients. But also tasting things at different stages in the cooking or baking process. Given the importance of sensory memory, I’d say the tasting part was probably more important in my development than the mixing. But the pride was mostly in being an active contributor in the kitchen.

Had I understood fermentation as a kid, I probably would have been fascinated by it. In a way, I wish I could have been involved in homebrewing at the time.

A homebrewery is an adult’s chemistry set.

A Glocal Network of City-States?

This one should probably be in a fictive mode, maybe even in a science-fiction genre. In fact, I’m reconnecting with literature after a long hiatus and now would be an interesting time to start writing fiction. But I’ll still start this as one of those  “ramblings” blogposts that I tend to build or which tend to come to me.

The reason this should be fiction is that it might sound exceedingly naïve, especially for a social scientist. I tend to “throw ideas out there” and see what sticks to other ideas, but this broad idea about which I’ve been thinking for a while may sound rather crazy, quaint, unsophisticated.

See, while my academic background is rather solid, I don’t have formal training in political science. In fact, I’ve frequently avoided several academic activities related to political science as a discipline. Or to journalism as a discipline. Part of my reluctance to involve myself in academic activities related political science relates to my reaction to journalism. The connection may not seem obvious to everyone but I see political science as a discipline in the same frame, and participating in the same worldview, as what I find problematic in journalism.

The simplest way to contextualize this connection is the (“modern”) notion of the “Nation-State.” That context involves me personally. As an anthropologist, as a post-modernist, as a “dual citizen” of two countries, as a folklorist, as a North American with a relatively salient European background, as a “citizen of the World,” and as a member of a community which has switched in part from a “nationalist” movement to other notions of statehood. Simply put: I sincerely think that the notion of a “Nation-State” is outdated and that it will (whether it should or not) give way to other social constructs.

A candidate to replace the conceptual apparatus of the “Nation-State” is both global and local, both post-modern and ancient: a glocal network of city-states (GNoCS).

Yes, I know, it sounds awkward. No, I’m not saying that things would necessarily be better in a post-national world. And I have no idea when this shift from the “nation-states” frame to a network of city-states may happen. But I sincerely think that it could happen. And that it could happen rather quickly.

Not that the shift would be so radical as to obliterate the notion of “nation-state” overnight. In this case, I’m closer to Foucault’s épistémè than to Kuhn’s paradigm. After all, while the “Democratic Nation-State” model is global, former social structures are still present around the Globe and the very notion of a “Nation-State” takes different values in different parts of the world. What I envision has less to do with the linear view of history than with a perspective in which different currents of social change interact with one another over time, evoking shifts in polarity for those who hold a binary perspective on social issues.

I started “working on” this post four months ago. I was just taking some notes in a blog draft, in view of a blogpost, instead of simply keeping general notes, as I tend to do. This post remained on my mind and I’ve been accumulating different threads which can connect to my basic idea. I now realize that this blogpost will be more of a placeholder for further thinking than a “milestone” in my reflection on the topic. My reluctance to publish this blog entry had as much to do with an idiosyncratic sense of prudence as with time-management or any other issue. In other words, I was wary of sticking my neck out. Which might explain why this post is so personal as compared to most of my posts in English.

As uninformed as I may seem of the minutiae of national era political science, I happen to think that there’s a lot of groupthink involved in the way several people describe political systems. For instance, there’s a strong tendency for certain people, journalists especially, to “count countries.” With relatively few exceptions (especially those which have to do with specific international institutions like the United Nations or the “G20”) the number of countries involved in an event only has superficial significance. Demographic discrepancies between these national entities, not tio mention a certain degree of diversity in their social structures or even government apparatus, makes “counting countries” appear quite misleading, especially when the issue has to do with, say, social dynamics or geography. It sounds at times like people have a vague “political map of the World” in their heads and that this image preempts other approaches to global diversity. This may sound like a defensive stance on my part, as I try to position myself as “perhaps crazy but not more than others are.” But the issue goes deeper. In fact, it seems that “countries” are so ingrained  in some people’s minds and political borders are so obvious that local and regional issues are perceived as micro-version of what happens at the “national level.” This image doesn’t seem so strange when we talk about partisan politics but it appears quite inappropriate when we talk about a broad range of other subjects, from epidemiology to climate change, from online communication to geology, from language to religion.

An initial spark in my thinking about several of these issues came during Beverly Stoeltje‘s interdisciplinary Ph.D. seminar on nationalism at Indiana University Bloomington, back in 2000. Not only was this seminar edifying on many levels, but it represented a kind of epiphany moment in my reflections on not only nationalism itself (with related issues of patriotism, colonialism, and citizenship) but on a range of social issues and changes.

My initial “realization” was on the significance of the shift from Groulx-style French-Canadian nationalism to what Lévesque called «souveraineté-association» (“sovereignty-association”) and which served as the basis for the Quebec sovereignty movement.

While this all connects to well-known issues in political science and while it may (again) sound exceedingly naïve, I mean it in a very specific way which, I think, many people who discuss Quebec’s political history may rarely visit. As with other shifts about which I think, I don’t envision the one from French-Canadian nationalism (FCN) to Quebec sovereignty movement (QSM) to be radical or complete. But it was significant and broad-reaching.

Regardless of Lévesque’s personal view on nationalism (a relatively recent television series on his life had it that he became anti-nationalist after a visit to concentration camps), the very idea that there may exist a social movement oriented toward sovereignty outside of the nationalist logic seems quite important to me personally. The fact that this movement may only be represented in partisan politics as nationalism complicates the issue and may explain a certain confusion in terms of the range of Quebec’s current social movements. In other words, the fact that anti-nationalists are consistently lumped together with nationalists in the public (and journalistic) eye makes it difficult to discuss post-nationalism in this part of the Globe.

But Quebec’s history is only central to my thinking because I was born and Montreal and grew up through the Quiet Revolution. My reflections on a post-national shift are hopefully broader than historical events in a tiny part of the Globe.

In fact, my initial attempt at drafting this blogpost came after I attended a talk by Satoshi Ikeda entitled The Global Financial Crisis and the End of Neoliberalism. (November 27, 2008, Concordia University, SGW H-1125-12; found thanks to Twistory). My main idea at this point was that part of the solution to global problems were local.

But I was also thinking about The Internet.

Contrary to what technological determinists tend to say, the ‘Net isn’t changing things as much as it is part of a broad set of changes. In other words, the global communication network we now know as the Internet is embedded in historical contexts, not the ultimate cause of History. At the risk of replacing technological determinism with social determinism, one might point out that the ‘Net existed (both technologically and institutionally) long before its use became widespread. Those of us who observed a large influx of people online during the early to mid-1990s might even think that social changes were more significant in making the ‘Net what it is today than any “immanent” feature of the network as it was in, say, 1991.

Still, my thinking about the ‘Net has to do with the post-national shift. The ‘Net won’t cause the shift to new social and political structures. But it’s likely to “play a part” in that shift, to be prominently places as we move into a post-national reality.

There’s a number of practical and legal issues with a wide range of online activities which make it clear that the ‘Net fits more in a global structure than in an “international” one. Examples I have in mind include issues of copyright, broadcast rights, “national content,” and access to information, not to mention the online setting for some grassroots movements and the notion of “Internet citizenry.” In all of these cases, “Globalization” expands much beyond trade and currency-based economy.

Then, there’s the notion of “glocalization.” Every time I use the term “glocal,” I point out how “ugly” it is. The term hasn’t gained any currency (AFAICT) but I keep thinking that the concept can generate something interesting. What I personally have in mind is a movement away from national structures into both a globally connected world and a more local significance. The whole “Think Local, Act Global” idea (which I mostly encountered as “Think Global, Drink Local” as a motto). “Despite” the ‘Net, location still matters. But many people are also global-looking.

All of this is part of the setup for some of my reflections on a GNoCS. A kind of prelude/prologue. While my basic idea is very much a “pie in the sky,” I do have more precise notions about what the future may look like and the conditions in which some social changes might happen. At this point, I realize that these thoughts will be part of future blogposts, including some which might be closer to science-fiction than to this type semi- (or pseudo-) scholarly rambling.

But I might still flesh out a few notes.

Demographically, cities may matter more now than ever as the majority of the Globe’s population is urban. At least, the continued urbanization trend may fit well with a city-focused post-national model.

Some metropolitan areas have become so large as to connect with one another, constituting a kind of urban continuum. Contrary to boundaries between “nation-states,” divisions between cities can be quite blurry. In fact, a same location can be connected to dispersed centres of activity and people living in the same place can participate in more than one local sphere. Rotterdam-Amsterdam, Tokyo-Kyoto, Boston-NYC…

Somewhat counterintuitvely, urban areas tend to work relatively as the source of solutions to problems in the natural environment. For instance, some mayors have taken a lead in terms of environmental initiatives, not waiting for their national governments. And such issues as public transportations represent core competencies for municipal governments.

While transborder political entities like the European Union (EU), the African Union (AU), and the North American Free-Trade Agreement (NAFTA) are enmeshed in the national logic, they fit well with notions of globalized decentralization. As the mayor of a small Swiss town was saying on the event of Switzerland’s official 700th anniversary, we can think about «l’Europe des régions» (“Europe of regions”), beyond national borders.

Speaking of Switzerland, the confederacy/confederation model fits rather well with a network structure, perhaps more than with the idea of a “nation-state.” It also seems to go well with some forms of participatory democracy (as opposed to representative democracy). Not to mean that Switzerland or any other confederation/confederacy works as a participatory democracy. But these notions can help situate this GNoCS.

While relatively rare and unimportant “on the World Stage,” micro-states and micro-nations represent interesting cases in view of post-nationalist entities. For one thing, they may help dispel the belief that any political apart from the “nation-state” is a “reversal” to feudalism or even (Greek) Antiquity. The very existence of those entities which are “the exceptions to the rule” make it possible to “think outside of the national box.”

Demographically at the opposite end of the spectrum from microstates and micronations, the notion of a China-India union (or even a collaboration between China, India, Brazil, and Russia) may sound crazy in the current state of national politics but it would go well with a restructuring of the Globe, especially if this “New World Order” goes beyond currency-based trade.

Speaking of currency, the notion of the International Monetary Fund having its own currency is quite striking as a sign of a major shift from the “nation-state” logic. Of course, the IMF is embedded in “national” structures, but it can shift the focus away from “individual countries.”

The very notion of “democracy” has been on many lips, over the years. Now may be the time to pay more than lipservice to a notion of “Global Democracy,” which would transcend national boundaries (and give equal rights to all people across the Globe). Chances are that representative democracy may still dominate but a network structure connecting a large number of localized entities can also fit in other systems including participatory democracy, consensus culture, republicanism, and even the models of relatively egalitarian systems that some cultural anthropologists have been constructing over the years.

I still have all sorts of notes about examples and issues related to this notion of a GNoCS. But that will do for now.